Double-station four-column type 20T wax injection machine

Product characteristics:

1. The plate is sheathed 4-column structure, stable and convenient Automatic mold mold assembly;

2. Pressure plate and the worktable are used four water cooling method, the fast cooling of wax;

3, The use of touch screen man-machine interface control, to ensure that the operation is simple, stable process parameters;

4, The equipment has dual mode, L pressure + two times H pressure filling wax injection mode, H pressure +L wax injection mode, H pressure +L pressure + two times H wax injection mode, automatic top function, automatic core pulling function;

5, The big layer of the three tubes, wax cooler and wax cylinder to meet the production of large molds.

6, The use of low-voltage electrical equipment world brand Schneider; hydraulic system using the original Taiwan, cylinder seal with the Japanese NOK seal.

7.  With the function of secondary pressurization and wax supplement, the temperature of wax paste preparation is lower.

Specification

1. The maximum clamping force is 20t;

2. The maximum formwork opening height is 500mm;

3. The minimum clamping height is 70mm;
4. Dimension of pressing plate and lower worktable 770 × 600mm;
5. Die space 620×600×500mm;
6. Auxiliary workbench 2200 × 410mm;
7. The expansion range of the nozzle is 0 ~ 200mm;
8. The lifting range of nozzle is 0 ~ 200mm;
9. The maximum use volume of wax storage cylinder is 100L;
10. The maximum wax injection volume of a single shot is 5L;
11. Wax injection pressure: 0 ~ 10MPa;